REXNORD ZB2212 Flange Block Bearings

Z:63.5 mm; d:25 mm; Designation of bearing:SES205; B:21.5 mm; A:38 mm; s1:24.25 mm; Weight:0.74 kg; Recommended tightening torque for set screw:3.9 Nm; H1:12 mm; Designation of open end cover:SCOE205-25;

Base to Center Hight Numeric:3.7500 in; Bearing Locking Device:Concentric Clamp Col; Bearing Series:203 Series; Shaft Attachment Type:TYPE C; Bearing Insert Material:Steel; Brand:Baldor-Dodge; UPC:782475040612; Housing Type:2 Bolt Pillow Block; d:2.1875 in; Expansion Type:Expansion;

Width T(mm):25 ～ 60; Number of Bearings:Double; Type:Bearings with Housin; RoHS:6; Bearing Retained:Yes (with retaining; Flange Shape:Round Type; Number of Bearings:Double; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Housing Material:[Aluminum Alloy] 201;

rs min:0.3 mm; C0r:2.28 kN; Nlim (oil):37,000 rpm; Cr:2.66 kN; Characteristic outer ring frequency, BPF0:3.2 Hz; Weight / Kilogram:0.01; Lubrication hole on outer ring:Non/No; Manufacturer Name:NTN; Precision class:P0; Minimum Buy Quantity:N/A;

s1:23.05 mm; Designation of bearing:ES203-11G2; A:25.4 mm; H:22.2 mm; C0:4.78 kN; T min.:-20 °C; S:6.5 mm; T max.:100 °C; B:19.1 mm; A1:15.9 mm;

Characteristic inner ring frequency, BPFI:8.76 Hz; Weight / Kilogram:0.432; r1s min:1.1 mm; d1:58.9 mm; rs min:1.1 mm; Nlim (grease):7,600 rpm; Product Group:B04144; Manufacturer Name:NTN; Dynamic load, C:63 kN; Mass (without HJ ring):0.43 kg;

Seal:With seal; Allowable Rotational Speed(rpm):13000; Roller Width B(mm):12; Shaft:No; Basic Load Rating, Dynamic Rating(kN):6.5; Roller Follower Type:Non-Separable Type; Roller Follower Type:Non-Separable Type; Category:Roller Follower; Unit:[Metric Series] Metr; Shaft:No;

Type:Bearings with Housin; Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; RoHS:6; Seals:ZZ (Double Shield); Lateral Width L(mm):62; Bearing I.D. d(mm):25; Shape:L-Shaped; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining;

d:17.46 mm; L3:38 mm; SW:3.18 mm; s1:30.5 mm; Designation of bearing:EX203-11G2; E:21 mm; Recommended tightening torque for set screw:3.7 Nm; L1:58 mm; T min.:-20 °C; B:34 mm;

Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Seals:ZZ (Double Shield); Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Flange O.D. H(φ):50; RoHS:6; Shape:Flanged Pilot Type;

RoHS:6; Width T(mm):25 ～ 50; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Bearing I.D. d(mm):12; Bearing Retained:No; Flange O.D. H(φ):44; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea;

B:11; Allowable Rotational Speed(rpm):14000; Roller Lining:None; Roller Lining:None; Unit:Metric Series; RoHS:6; Category:Cam Followers; Roller Guiding Method:Retainer Type; Basic Load Rating Cor (Static)(kN):4.65; Volume Discount:Available;

J:50.8 mm; H2:65 mm; S:12.7 mm; H1:11 mm; s1:15.5 mm; A:38 mm; T max.:100 °C; L:73 mm; Designation of open end cover:SCO204-20; Recommended tightening torque for set screw:3.9 Nm;

Type:Bearings with Housin; Thickness T(mm):30 ～ 50; Housing Material:[Aluminum Alloy] Alu; Height H(mm):30 ～ 50; Number of Bearings:Double; Holder Surface Treatment:Clear Anodize; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Number of Bearings:Double; Bearing Material:[Steel] Steel;

d:41.28 mm; m:10 mm; T max.:100 °C; Weight:1.36 kg; D:100 mm; SW:4.76 mm; C1:9 mm; C0:31.8 kN; S:22 mm; C:30 mm;